Vehicles
(Ground, Air, Water and Space Transportation)
41 topics in this forum
-
- 3 replies
- 607 views
here´s a paper jet, made of a plain sheet of paper, folding-action included. paperjet.zip
Last reply by thefreshestever, -
- 6 replies
- 692 views
This PTR (personal transport rental) will get you from point A to B before you can say light speed! the model has the canopy and legs Rig and animated with sliders. fully textured as well. Enjoy! classic_space_ship.zip
Last reply by johnl3d, -
- 4 replies
- 710 views
here is a neat little Rocket ship made out of cardboard boxes. i use to build these things constantly as a kid. so i thought i would share my fun with you guys! enjoy! P.S. could also be a airplane cardboard_rocket.zip
Last reply by Kamikaze, -
- 0 replies
- 1.1k views
Here's the USS Midnight, hopefully you won't have any decal placement issues, but all the files are there, but it may prompt you to look for them when you first open the model. To open this model, load up a new Choreography, >Import>Choreography and import the USSMidnight.cho (I believe it's located in the folder called Finals) This will load the Midnight with all lighting for the ship and everything. Just opening the .mdl will not have the lights one the ship. Enjoy USSMidnight.zip
Last reply by Darkwing, -
AT-ST Model
by Meowx- 7 replies
- 668 views
Was digging through my old Hash folder and came across this model I did some years ago. It's not textured, the rigging is pretty basic FK stuff, and some of the splinework is downright head-scratching... but it doesn't look half bad. Figured I'd put it here for whoever wants to use it. Or, if you want to improve it - IK rig it, texture it, whatever - knock yourself out. Enjoy! AT_ST_2003v1.mdl.zip
Last reply by Rodney, -
- 1 reply
- 706 views
I modelled this AT-AT a while back, and am now offering it to you through the A:M Exchange. There are 7 .mdl files in the zip file, along with the materials. The .mdl files are: AT-AT.mdl - contains the entire AT-AT model. Legs are just straight up and down, so the 'toes' overlap. AT-AT Body.mdl - contains just the main body section. AT-AT Head.mdl - contains just the front 'head' cockpit section. AT-AT Legs.mdl - contains just one leg. AT-AT Motors.mdl - contains the front and rear leg motor drive sections. AT-AT Neck.mdl - contains the connecting neck section between the head and body. AT-AT Upper Guns.mdl - contains the upper guns that are m…
Last reply by KenH, -
- 2 followers
- 5 replies
- 162 views
Race car model. Textures and project file included in zip file. Mike racecar.zip
Last reply by Michael Brennan, -
- 3 replies
- 620 views
It's pretty basic as it was made for a toon animation. Hope some of you can use it! Just don't ask how the basin magically floats over the axles. Baby Cariage.mdl
Last reply by johnl3d, -
- 4 replies
- 748 views
I believe most of these Star Wars models by Dan Olsson are on the Extra DVD but... not everyone has the Extra DVD. http://ammodels.tripod.com/ There are also some other (non-Star Wars) models on the site and an earlier version of the classic Ed's Head.
Last reply by Rodney, -
- 1 follower
- 8 replies
- 2k views
it's time to share it ... if you like it consider a donation to my PayPal account: xtaz @ xtaz . com . br
Last reply by a.quaihoi, -
- 1 reply
- 544 views
this was a project someone presented to me for a flight sim game. this was 1 of 100 models i was working on for the last month. most of the other models are copyrighted but this one is not part of the list since it was the wrong year they asked for. so since they aren't going to use it you guys can share it. this model is not rigged since they rigged all the models in another program with a special rig for the game. total patch count 4274. enjoy! Blade_MCX.mdl
Last reply by TheSpleen, -
Golf cart that was requested by the spleen. Enjoy! golf_cart.mdl
Last reply by NancyGormezano, -
- 4 replies
- 555 views
Very down and dirty airplane model. Have fun! Airplane_Cessna_172.mdl
Last reply by johnl3d, -
- 2 replies
- 435 views
Old-Timey automobile, as seen in this TV spot: http://youtu.be/f_uHIcW_n6k OLD_CAR.mdl
Last reply by John Bigboote, -
- 2 replies
- 589 views
Hi Everyone, Here's a model I imported using the import tool. GREAT JOB AM! Originally it was the .obj format. Enjoy! bike.mdl
Last reply by John Bigboote, -
- 5 replies
- 670 views
Hey everyone, I'm doing a little reseach on how to get one of those cool/ realistic airplane prop spins. Anyone run into a good method with A:M. William
Last reply by detbear, -
- 1 reply
- 538 views
Bumper Cars bumper_cars.mdl
Last reply by TheSpleen, -
- 0 replies
- 519 views
Here's some models made for ELZ, credit goes to: Ken Citron Al Dinelt Eric Camden Chris Cameron Spitfire.zip Aerial_Transport.zip Boom_Schtick.zip
Last reply by Darkwing, -
- 5 replies
- 426 views
Here it is the GG1 Electrics Engine. GG1.zip The Pentagram is rig. GG1_p..mov The model comes in three parts for you convexness And has an action/pose in the main body to assemble in choreography. Have Fun
Last reply by johnl3d, -
In stead of sitting on this until I get so more bodies made I will just post this. This was modified to be more like an amusement park go cart. gokart_002.mdl gokart_003.mdl It dose have a basic rig on it. Just adding a 360 vid. go_kart_360_021win..mov
Last reply by DJBREIT, -
- 2 followers
- 32 replies
- 5.1k views
Last year I decided that the investment in tools for 3D design would be paid through funds obtained through 3D work .... I did some contracts that guaranteed the purchase of some hardware ( bamboo )/ software ( A:M Paint, A:M Track 2, ToonBoom storyboard ). But now the fund is over, aiming at the TDP 2020 project I still have some shopping to be done (- One year subscription / - Jenpy plugin ). Almost everything I know about A:M I learned here in this forum, and to give back many years and years of advice and guidance, I decided to make available for free all car models that I made during these years together with you. if you think I deserve it, make a donation of a…
Last reply by Maniac, -
Hey guys i forget who asked me for this model i remember it was sometime back in spring I finally found time to get around to it this took about 4 hours to model total hope you all like it it was created in V16 Enjoy! gokart.zip
Last reply by pixelplucker, -
- 1 follower
- 6 replies
- 514 views
Electric Locomotive NYC S-2 NYC_S_2.mdl NYC_S_2.prj
Last reply by pixelplucker, -
Here is a box car. Railroad_Box_car.mdl
Last reply by R Reynolds, -
- 1 follower
- 18 replies
- 1.2k views
Hey all, As some of you may know, my interest and main use for A:M is as a modeler for game assets for use in Dark Basic Pro. I think I've come up with a pretty good workflow. I like working with splines, it just makes sense to me, which is why I chose A:M as my modeler. I've got a long way to go to get as good as you guys, but, I'm trying. Anyway, I entered a community contest on the Dark Basic forums for a low poly game assest. Rules were, it had to be under 1000 triangles and textured. Well, I admit, I do suck at textures, but, I bought 3dPainter for this project, and future projects, of course. My entry was MY interpretation of the FW190 tutorial in the TAOM book. I…
Last reply by pixelplucker, -
- 1 follower
- 6 replies
- 613 views
Viper Mark II The Mark II is an older version of the Viper commonly used on the Battlestar Galactica after the attack by the Cylons. These ships are extremely maneuverable and capable of both space and planetary flight. These ships are not equipped with FTL drives, but carry two rapid firing guns and have the ability to load missiles on the undersides of the wings. This model is essentially complete, except for some more work on the cockpit and more decal work, but until then, here is the model. Model has 11,294 patches. ViperMKII.zip
Last reply by Darkwing, -
another military project i took on a few years ago thought you enjoy the model *updated image* Tank.zip
Last reply by thejobe, -
- 2 replies
- 478 views
Part of a military project i was working on, made this boat for a friend of mine who was heading into the navy and needed some reference material. thought i would share with you guys since he hasn't needed it for the last 5 years Edit: Doh! forgot the pic! boat.mdl
Last reply by thejobe, -
- 1 follower
- 4 replies
- 660 views
Here is the Moon Bus from the movie 2001 - A Space Odyssey. It has just very basic textures applied, and could really use an expert texturer's touch on it. At this time, there is no interior. Enjoy... Al 2001_Moonbus.zip
Last reply by steve392, -
- 1 follower
- 10 replies
- 820 views
Here is the EVA Pod from 2001 - A Space Odyssey. It has a series of pose sliders for controlling the manipulator arms. Enjoy... Al EVA_Pod.zip
Last reply by Jaff, -
- 3 replies
- 575 views
wheelchair.mdl it's not rigged but it looks good.
Last reply by TheSpleen, -
- 1 follower
- 22 replies
- 2.4k views
Finished working on the Discovery, and am providing it here for anyone who wants to use it. Revision History: 2009-11-16 Included Pod Bay Interior with Discovery model. The Discovery and Pod Bay Interior are now assembled via Actions instead of inside a chor 2009-11-25 Include the Cockpit Interior as a separate download. If you haven't done so, download the Discovery model. Next, download the Cockpit model and include it into the existing Discovery folders. Discovery actions have been updated to include assembling the cockpit. Separate cockpit action to assemble just the cockpit, independent of the Discovery. I renamed the excellent benlens4.…
Last reply by Tralfaz, -
- 2 followers
- 7 replies
- 736 views
An obscenely huge SUV, that advertises one MPG on the freeway. I made this for a joke advertisement. Fort_Hydra_v15.mdl
Last reply by Douglas Ferrin, -
- 4 replies
- 662 views
Rigged kids wagon and of course FREE. Any suggestions or modifications just hollar. Category: Props Category: Vehicles red_wagon.zip
Last reply by T-Dogg, -
- 4 replies
- 698 views
I tried uploading this .mdl file yesterday and the forum crashed...hope it wasn't my fault! Here is an old-timey WW2 Jeep Willy's model I made for a website design that never happened. Untextured. Category: Vehicles WillysTESTsmall.mov Jeep_Willys.mdl
Last reply by steve392, -
- 7 replies
- 787 views
Hello. Here is my work what i have done. klik "Files" and there is picture on models and klik picture. download mdl or prj file (rar) catapult is made by use newton simulation.. use any you like.. (i fly shaggy on sky on Catapult...sorry) http://koti.mbnet.fi/jani73/AnimationMaster/AmRaamit.html
Last reply by Hodari, -
- 1 follower
- 6 replies
- 969 views
I started modelling TOS NCC-1701 Enterprise, but developed repetitive strain injury in my wrists. I am kind of limited as to what I can do on the computer these days, and being a programmer, have to keep the hobby stuff to a minimum. Don't know when I would be able to finish this model, so am now offering it to you through the A:M Exchange in case you can use it. It is about 95% complete, needing only a few more decals to add and a few details to finish modelling. I would really be interested in seeing how this one turns out. Enjoy... Al Category: Scifi Category: Star Trek Category: Vehicles Enterprise.zip
Last reply by jason1025, -
- 1 follower
- 16 replies
- 1.2k views
I modelled this Honda Rebel motorcycle a while back, and am now offering it to you through the A:M Exchange. There are 5 .mdl files in the zip file, along with the materials. The .mdl files are: Honda Rebel 250.mdl - the entire motorcyle in a complete assembled model Rebel 250 Engine.mdl - the motor, exhaust and chain Rebel 250 Frame.mdl - contains the frame, fender, front forks, rear swing arm, seat, gas tank, etc. Rebel 250 Front Tire.mdl - contains the front rim, tire and disc brake assembly Rebel 250 Rear Tire.mdl - contains the rear rim, tire assembly The different model files also contain the different parts in separate groups. So, if you wa…
Last reply by Tralfaz, -
- 1 follower
- 10 replies
- 971 views
I modelled this Gallardo a while back, and am now offering it to you through the A:M Exchange. There are 5 .mdl files in the zip file, along with the materials. The .mdl files are: [/size] Gallardo Complete.mdl - contains the complete model, exterior, interior and wheels and rims. Gallardo Exterior And Wheels.mdl - contains just the exterior and wheels and rims. Gallardo Exterior.mdl - contains just the exterior body. Gallardo Interior.mdl - contains just the interior. Gallardo Tires And Rims.mdl - contains just the four rims and tires. Feel free to use the model as you see fit, although I would appreciate credit when not used for personal purposes…
Last reply by brainmuffin, -
Star Wars AT-AT 1 2
by Tralfaz- 1 follower
- 99 replies
- 5.3k views
I modelled the AT-AT from Star Wars once before. Actually, I modelled it once in Anim8or, than once again in Animation:Master. There were a lot of flaws in those models. I've learned quite a bit about modelling since I originally created it (bevelling edges, minimal spline usage, etc.), so am attempting to do it once more. I want to have it as detailed as possible as I have a plan for it. I have had a plan for the AT-AT all the way back to when I modelled it in Anim8or. Anyway, here is the start of it. I am building it with animating it in mind. I am creating and naming groups for specific tasks as I go along so that it will make it easier when it comes time f…
Last reply by Eric Camden, -
- 5 replies
- 874 views
Hi all, Purpledingo recently contacted me asking if I could provide the X-Wing model I used in my CGI video because he couldn't find it in the free models location. Knowing that this is an excellent rendition model of an X-Wing I thought it would be a shame not to have it. I don't know how it could have been lost but according to Purpledingo, it's not on the free models CD so here's the zip from my original download. Please re-add this to the free models collection. It's a bummer that the modeler didn't leave their name. thanks, George Xwing.zip
Last reply by MattWBradbury,
