Open Forum
Don't know where to ask your question? Post it here and it'll find a proper home
Open Forum Rules
This is an open forum for discussing Animation:Master and discussions should relate to A:M in some capacity.
Ask questions. Share experiences. Outline goals and aspirations.
Discuss what you hope to accomplish with A:M and projects you are working on.
There is one rule: Be kind.
Posts that violate this rule are subject to removal.
986 topics in this forum
-
- 1 follower
- 1 reply
- 7 views
Hi gang, Been while. I purchased a year subscription but download link left me nowhere. Help? Rusty
Last reply by Jason Simonds, -
- 1 follower
- 1 reply
- 54 views
As some of you might already know I have been re-working the project I created in AM back in the 2000s (Bella Bear). It didn't make any headlines other than a nomination in the International Festival of Cinema and Technology animation festival in 2007… But it was fun to do. Anyway, I kinda stopped using AM and setup as a freelance 3D Artist/Animator in 2010 and used various other 3D software since studios in the UK tended not to use AM. Recently having decided to re-visit my project I have been converting it all over to other apps and found that my knowledge of AM is VERY rusty… One of the things that I am finding is that although other 3D apps have better render eng…
Last reply by Roger, -
Mouse issues
by Phil- 4 replies
- 87 views
I've been having some mouse issues with 64bit 19.5.F1 & F2. selecting points buy clicking and dragging to select points, just give a green dash box but doesn't select any thing. is this a known issue? doesn't happen using 19.5.E, also with 32bit version
Last reply by robcat2075, -
- 3 replies
- 59 views
I have 19.5D, E, F1, F2 installed to their individual folders. i was testing to see if i could duplicate the mouse issue. now when i open the other version i get keeps changing depending on which version i go into. I can power through the missing files and them point them to the correct folders. is there a reason this is happening?
Last reply by Fuchur, -
- 2 followers
- 9 replies
- 739 views
OK, one year later and I am posting again Some here might remember me from many years ago when I was using AM on daily basis to create my own characters and stories. Well I didn't get anywhere with my ideas other than a few smiles here and there. I tried publishers and some production companies to see if it generated any interest but never got much feedback so it was a bit of a dead duck. I did try the Children's Media Conference back in 2014 but again no interest and more recently another book publishers but that was a no go either. So my question or rather what I am thinking is should I revisit my project once more to see if I get anywhere with it or is…
Last reply by Shankill, -
- 1 follower
- 107 replies
- 31.3k views
UPDATE: as of July 25, 2016... the price keeps changing. Keep your eye open for deals. Amazon is offering all six "Golden" collections for $65 $48.49 24 DVDs Until midnight tonight only. For how long I don't know. Looney Tunes Golden Collections
Last reply by robcat2075, -
- 0 replies
- 375 views
Two old gigs from the 2000 year. I don't no who made them, I do know it was the reason I bought my first version of Animation Master. 😊 greeter[1].avi flower[1].avi
Last reply by Madfox, -
- 11 replies
- 3.9k views
Does anyone happen to know if there is a "dark mode" for the AM forums? The bright white can be overpowering sometimes.
Last reply by Tom, -
- 0 replies
- 261 views
Has anyone ever tried using AM under Crossover, either on Mac or Linux? I'm contemplating trying running it on Linux under Crossover and just wondered if anyone else had already tried this.
Last reply by Roger, -
- 2 replies
- 308 views
...what's going on. I still run A:M on a legacy Mac Pro. I just bought a new PC specifically and only to run the new versions of A:M. But can I still buy Hash? I get the impression it's kind of a side project now and the support staff is very busy with other things. I perfectly understand how hard 5 spare minutes can be to find sometimes. If I order a permanent license from the Hash Store, will I get my activation code email right away, or whenever the staff finds the time? I'm eager to see what this Alienware gadget can do and Hash A:M is the only reason I bought it. Right now it's just sitting there receiving spam from Microsoft. Thanks.
Last reply by Michael Brennan, -
- 6 replies
- 499 views
Sorry for the late notice but there is a webinar that Animation Mentor is running today at 2pm ET on rigging: Animation Webinar Sign Up | Animation Mentor FREE!! You just need to register.
Last reply by robcat2075, -
- 10 replies
- 1.4k views
Does anyone know a way to convert this example SWF to a conventional MP4 video file? There are several Hash Tech Talks in SWF format, which can no longer be played in browsers now that Flash is gone. I've tried several converter sites but they all fail in some way. One site I found will intelligibly play the SWF video but doesn't enable any scrubbing of a timeline. We need some way to convert these to regular video.
Last reply by Ganthofer, -
- 1 follower
- 2 replies
- 337 views
I am looking back at my 'Bella Bear' project I created back in circa 2006/7 so the files are old… I am having problems scrubbing through timelines using the latest version of AM. I keep getting 'Computing Dynamics' popping up and slowing everything down. Can someone tell me how to turn this off?
Last reply by gazzamataz, -
- 1 follower
- 17 replies
- 1.2k views
Hey all, really off topic, but I just got myself an iPad pro and Pencil and was like hmmm . . . AM would rock on this thing, even if its just the modeller, I can only dream for now or can I
Last reply by a.quaihoi, -
- 6 replies
- 534 views
Hello good evening to everyone out there, I am an old member of the AM forum absent for a long time, something like 10 years now, I moved away from 3D due to job changes, and now I want to get back into it, I have updated my equipment several times since then and I have not longer the AM program in my pc, I stayed on version 15 in fact I have the AM CD but I left the forum shortly before the CD become usefulness to start the program, could someone tell me how to reactivate Animation Master, I already changed my equipment and no longer use a CD-ROM reader, It´s a pleasure to stay here again hopefully someone can tell me how to reintegrate to AM, thank you very much in adva…
Last reply by Madfox, -
- 5 replies
- 311 views
Hello Window 10 users- Microsoft was going to pull the plug on supporting Windows 10 in October however this news article says their is a bit of a reprieve: https://www.msn.com/en-us/news/technology/windows-10-gets-an-extra-year-of-free-security-updates-with-a-catch/ar-AA1HlkZw?ocid=hpmsn&cvid=7ba54f7850154e77becf674c7348d3b5&ei=22 Does anyone know how difficult it is to sync Windows Settings with OneDrive? Thanks for any insights, Tom
Last reply by Tom, -
- 2 followers
- 7 replies
- 646 views
Hi all, soooo, just upgraded to Win11 from Win 10 ( had a crash and decided to upgrade ) and have installed AM 19 / 19.5 ect. have noticed some slowdown over from Win 10, has anyone encountered this who's on Win 11, granted my rig is still an old mac pro / DP Xeon 3.4g / 128 Ram /Radeon RX 580, but AM was much faster with windows 10, looking to upgrade the rig soon to a Minisforum MS 1 or Dell precision compact 3240/60 just for AM, with possibly an RTX A2000 / 4000 GPU, am working with Perry Animations on a few things for his feature moofee and the small pc's would be great for potability for onsite work. On GPU front does anyone know if AM loads most of the w…
Last reply by robcat2075, -
- 1 follower
- 2 replies
- 558 views
which software product is more compatible with Mac?
Last reply by a.quaihoi, -
- 4 replies
- 439 views
So I had an interesting question from someone that has an interest in CG and used the program back in the Journeyman days. He's interested in exploring prior versions of AM. I told him that previous versions are available, provided you have an active license, although I wasn't sure how far back the archived versions go and he would definitely be using the really old versions without formal support. Assuming you wanted to use Version 3 or 4 or 5, can you go back that far? Or are we limited to say, v12 as the oldest version that can still be downloaded?
Last reply by Roger, -
- 1 follower
- 7 replies
- 524 views
Hello, I am seeking a new activation key for windows v19 for my legal copy. I have not been able to get any reply from support for a couple of years - what should I do? I may have reinstalled or something - I don't recall. The specific error is - I get an "already used" message. Invoice details are available. Respectfully, Mark Raley
Last reply by robcat2075, -
- 2 replies
- 450 views
If you haven't seen it elsewhere, this is the famous 1935 memo from Walt Disney to the studio drawing instructor, Don Graham. In this he lets loose on many ideas he has to better the quality of work. Even though he's no longer drawing anything at this point, he is ahead of most of his staff on form and force and motion and acting. Drawing shouldn't just be about representing something accurately, it should make it into something more.
Last reply by Roger, -
Hi all, I upgraded my pc hard drive to a larger capacity by cloning my hard drive and now my license is not valid, checked the host id and it has changed, is there a way to stop this from happening, I wish we still had dongles, would be super good right about now so I dont have to bug Jason all the time, especially when you need transition to a new computer
Last reply by a.quaihoi, -
- 3 replies
- 450 views
Hi folks! Oh so long ago I did several animation projects in v12 and now I am interested in picking up where I left off on one of them. Will the current version even open files that old? What later version could open those files? Thanks for your help, Will
Last reply by robcat2075, -
- 0 replies
- 439 views
It's all 'math' to me... My question as it relates to 3D modeling is: How does this contribute to continuity of adacent (relatively) planar surfaces? There is another element of this video suggests 0-0=0. But is this more 'pulling rabbit from hat'* in considering that an x - y = z where none of the variables are (invariably) equal? How equal are they and when are they equal? *To use a phrase from the video. This underlying schemes concerns polygons. Useful for math but historically an obstacle for splines and patches. Terms to consider regarding continuity: Triagons, non intersecting diagonals …
Last reply by Rodney, -
- 1 follower
- 5 replies
- 579 views
Is there a particular version that is better suited for one or two screens. I currently have one screen and I may be looking to adjust with a laptop and a tv screen. Will that effect how the picture transfers.
Last reply by robcat2075, -
- 1 reply
- 503 views
I recently render an animation using toon Render. I was wondering do guys have any Tips or any suggestions for really cool looking Renders using toon Render. What setting for shadowing or Line quality or anything do you recommend. Or anything you recommend -Thanks
Last reply by robcat2075, -
- 5 replies
- 697 views
I made a model with lots of loosing ends coming out of it. My goal is to use it several times with use of dynamic constraints. So I added all loose ends with several dynamic constraints with different weights and saved the file. After using this file in an action with succesful weighted effect I saved it under a new action name. When trying to use the start action with the saved file all my dynamic constraints are gone. Is this a common fact, or isn't it possible to reuse a file that has the dynamic constraints already confirmed?
Last reply by Madfox, -
- 0 replies
- 235 views
was having an issue getting these 2 to dance but Robcat made itr happen Project1.letsdance.prj
Last reply by johnl3d, -
- 0 replies
- 403 views
Hello- I saw a product at Comic Con last year and it was intriguing. This new app allows animators to tell stories that are sort of hybrids between animated storyboards and full animation. They also pay for content on a sliding basis. https://www.storiaverse.com/for-animators For any storytellers on the Forum, check them out.. Tom
Last reply by Tom, -
- 0 replies
- 439 views
Here is a posing tip I had not encountered before. It may work better for puppets who can never shift eye direction, but it is important that your character appear to have purpose in where he looks.
Last reply by robcat2075, -
- 1 follower
- 9 replies
- 856 views
I’m doing an animation for our local community theater. While Sir Nigel is narrating, Granny here will be slowly (like Tim Conway vs Harvey Corman) crossing the street with her walker and will enter the theater and go to the dressing room. (When she comes out she will be Lambrina. I had to “Build” Granny and rigged her with the 2008 light rig. The Lock IK is ‘on’ on both hand and forearm bones (and attached to parent). Both hands are “Translate to” constrained to the ‘Walker” bone, but when I move the walker bone, the hands move with the walker but pull away from the forearms. I have probably gone wrong in several different directions, but I’m clueless …
Last reply by MJL, -
- 1 reply
- 514 views
Robert, Roger and I were discussing various topics and some of Walter Lantz's drawing and animation resources were shared and discussed. Here's one that we didn't discuss on creating characters that includes a storyboarding session. Several currrent day legends in the animation business such as Eric Goldberg claim that watching Walter Lantz's shows delving into the process of animation were early inspirations to them. What got me thinking in the direction of Walter Lantz was his book 'The Easy Way to Draw' which I had never heard of but have recently added to my library.
Last reply by robcat2075, -
- 2 replies
- 579 views
Hi Everyone, Does anyone know how to save a model and export as a mdl file for 3d painter? Mark D.
Last reply by Fuchur, -
- 1 reply
- 664 views
"What free or affordable software or mobile app would you recommend for motion capture?"
Last reply by robcat2075, -
- 0 replies
- 335 views
At Live Answer Time today we watched the very first animation treatment of "Rudolph the Red-Nosed Reindeer" Produced and directed by Max Fleischer as "A Jam Handy Picture" in 1948. Of the four credited animators ... Howard Kakudo ... animator Robinson McKee ... animator Fletcher Smith ... animator William Sturm ... animator ... only Sturm has a substantial IMDb trail, having been a former Fleischer Studio animator. The original Rudolph story was written by Robert May for an ad camp…
Last reply by robcat2075, -
- 1 follower
- 2 replies
- 643 views
I'm making a fireworks mode. I'm not planning on animating it at first,although it would be very cool to do so. There used to be a "Wizard" that pot a 'particle on a CP along a path, but i don't remember exactly what it was called, and I can/t seem to find it now. EDIT: EXTRUDE is the wizard, but it's not working the way it used to. It just occurred to me that an exploding fireworks model may already exist somewhere. Thanks in advance
Last reply by robcat2075, -
- 13 replies
- 2.2k views
Hi, I’d like to open a discussion on creating springs in Animation:Master. Rob created a great tutorial demonstrating the bone-to-spring system, which is an older method in Animation:Master. My question is whether it would be possible to use Bullet to create springs, as they could be considered soft bodies in Animation:Master. Thanks,
Last reply by Tom, -
- 3 replies
- 774 views
Hello All- I see that Microsoft is abandoning Windows 10 security updates on October 2025 and I wanted to ask any Windows 11 users if they have had any problems running Animation Master in Windows 11? Thanks for any info, Tom
Last reply by Fuchur, -
- 0 replies
- 452 views
Happy Thanksgiving! Here are a couple of relevant-themed classic cartoons for the day...
Last reply by robcat2075, -
- 1 follower
- 1 reply
- 523 views
Do anyone know if AM 19.5 needs to have Internet connection to boot?
Last reply by robcat2075, -
- 0 replies
- 447 views
Ward Kimball thinking about the Mouse...
Last reply by robcat2075, -
- 0 replies
- 660 views
Animation Mentor has posted the recording of their November 13 webinar. Animating Natural Walk Cycles. That sounds like a great topic!
Last reply by robcat2075, -
- 4 replies
- 821 views
AnimationMentor has another free webinar upcoming on Oct 1. How a Pixar Animator Uses 2D Update... Animation Mentor has posted the recorded Zoom session:
Last reply by Roger, -
- 15 replies
- 2.5k views
Hi Guys, I was curious if you had any favourite books and recommended reading on animation / creating shorts? Been reading more about screenwriting lately also wondering if there are good books specifically about writing for animation?
Last reply by robcat2075, -
- 1 follower
- 9 replies
- 998 views
Does anyone have a "Little Old Lady" type model that I can borrow-rent-buy? I need two versions: 1. A Tweety Bird's owner Granny type 2. A Mrs. Santa type Perhaps we could make a "Model Swap"?
Last reply by MJL, -
- 1 follower
- 42 replies
- 5.7k views
I'm researching software for the initial workup of a game app proposal and have been asked to investigate software to build the proposed application. At this time the project is pre-pitch/prefunding with much of the material confidential so I can't go into detail on specifics of the game itself but the following is basic criteria: The team is affiliated with an Educational Institution and likely eligible for education/student licensing. The team consists of approx 14 people most of which are technical experts in the games subject matter (not gaming, graphics or software development). -- Depending on funding/green light to go ahead the team may involve students an…
Last reply by Darrin S, -
- 0 replies
- 653 views
Guru explains serious new Windows vulnerability, an exploit that requires zero action by you to work! Short version of advice: Update your Windows and turn OFF "IPV6" (Which you probably don't need ON anyway)
Last reply by robcat2075, -
- 3 replies
- 848 views
Anyone here have a 3D printer and know how to use it? The resin kind, not the filament type.
Last reply by Fuchur, -
- 0 replies
- 584 views
Animation Mentor has announced a free Zoom "webinar" on facial animation. I'm guessing it will be about 90 minutes long. They will probably be demonstrating in Maya but I'm sure whatever they do is doable in A:M. How to reproduce those things might be an interesting topic to discuss here on the forum! Register for webinar Animating Facial Expressions A recording of the live webinar has been posted
Last reply by robcat2075, -
- 3 replies
- 849 views
So as you probably have noticed, I don't just love Animation: Master, but I’m also very interested in its’ development history and I just wanted to know what .prj scene files were included at the time on the CDs of the software. Were some of them scenes from the showcase gallery here? https://forums.hash.com/gallery/album/1-showcase/ If yes, then which of them were in these two versions? Also for the scenes that are not included in the gallery, could you show me some wireframe screenshots and final renders of what they looked like (including information about which were included on which CD)? I’m talking about .prj files which are not included in the Extras CD…
Last reply by robcat2075,
