Help Wanted (Available Jobs)
Help Wanted - For those who needing eExpertise
PROFESSIONAL LEVEL Employers, post your available jobs here.
1. Post your requirements:
a: Modeller/Rigger/Animator/Lighting/Texturing/Sound/etc.
b: Type of work i.e. mechanical, organic
c: Approximate time frames (how soon do you need the help, how long might it last)
d: Link to your website or post an email address* or both.
e: If this is "X rated" work please make this clear in your posting
*if you are concerned about spam bots, etc., you can conceal your email address in a format similar to Jsmith(at)grayskies dot com.
2. All communication between employer and potential employee should occur in private email,by phone, or elsewhere, outside of the Hash forums. Only exception... cannot find your site, your email address not working.
3. Please let us know if you have found the help you need. Eventually all postings will disappear after a set time frame. But, until then, if you edit your post or post a followup that the position is filled it will save you alot of unneeded communication.
104 topics in this forum
-
- 1 follower
- 1 reply
- 344 views
Hi everyone, I haven't been on here in a decade or so but it's good to be back I'm two years into (part time) production of an animated feature film. It's a musical sci fi swashbuckler and I currently have ten minutes of it completed. I'm searching for great Animation Master artists that want to get involved to help me get it moving along faster. I'm self funding it so I'm not after full timers, just some skilled AM users that know how to get work out the door. Anyway drop me a dm or say hi on this thread and let us know what you're speciality is with AM and we can go from there 👍🏾🎉❤️ Dylan Perry Perry Animation
Last reply by detbear, -
- 2 followers
- 50 replies
- 3.4k views
Email submissions to jason(at)jasonhampton.us Requirements: 1. Must be modeled in Animation Master. 2. Models must be textured. 3. Submissions must be both a textured model and a rendered frame of that model. 4. Final renders must use Ambient Occlusion and a recommended neutral white background. 5. Renders must be 1280x720 resolution. 6. All submitted renders must have the creators email address branded in the lower right hand corner in black Arial text. 7. By submitting your model you are allowing it to be used by anyone in the Hash forum for commercial or personal use. 8. All models and renders must be emailed to jason AT jasonhampton.us by the …
Last reply by robcat2075, -
- 0 replies
- 994 views
Professionals, If you have paid work available, this is the place to post your needs. Please follow the simple rules above. Try to keep all correspondence with potential employees private. If there's anything I can do to help you, please send me a personal message by clicking on my forum name, I'll do my best to get back to you promptly. Thanks,
Last reply by oakchas, -
- 1 reply
- 1.5k views
If you are interested in creating Star Wars helmets for an animation project, I would love to discuss the opportunity with you. I am willing to pay competitively for each helmet that is made and could offer a flexible payment structure to accommodate your needs. Please get in touch if this sounds like something you would be interested in doing! Thank you for your time.
Last reply by detbear, -
- 1 follower
- 0 replies
- 112 views
Hi gang, I have in the process of developing a game for over fours years, initial started out as a 2D game and it was initially developed in coco's 2d, then it was redeveloped in unity with with two versions, but I was working with developers that had just started out which I sourced through freelancer websites, after spending a lot of time and money on getting the versions made and setting up betas through iOS / Android the project was still not completed and I had to shelve it. The concept and development is quite simple, however it needs to support multiplayer which will require setting up a server for multiplayer so players can play cross platform or thro…
Last reply by a.quaihoi, -
- 3 replies
- 1.2k views
Pro Video: designed to meet all the audio & video needs of its customers Pro Video: Designed to meet all the audio & video needs of its customers The 1990s, a decade of change, a decade of new technology, a decade that will pave the road into the 21st century. Businesses must look at the present with any eye for the future, and that is exactly what Pro Video Sales Company aims to do. For more information: Best car speakers for bass, best car speakers in the world What can Pro Video do for Delaware Valley Companies? We design, install, supply and service the equipment necessary for state-of-the-art conference rooms, editing suites, video contro…
Last reply by serg2, -
- 3 replies
- 1.9k views
Hi I'm looking for artists and Animators in the Hash forms to help out with a music video I'm going to pay between ($150-$450) for its completion. I need the following : Modeler Rigger Animator Lighting Texturing Possible sound I will like to have this done by the middle of November. If your interested in working on this project or having questions. my contact information: tmmbr26@gmail.com 734-619-9121 https://www.facebook.com/tim.mabry.54 the song to the music video is in the Attach Files down below.
Last reply by Newflave, -
- 3 replies
- 2.1k views
I need a fully rigged cartoon roach that has a mafia look and feel. It needs to be wearing a wiseguy hat and be able to click a remote control and talk (needs a mouth with mouth morphs). Hands must work (I need four hands that can be rigged and posed) - I intend for him to click a remote control and use hand gestures in the animation). If it can be brought into Carrara Pro 8.5, I do have Mimic Pro for Carrara for making him talk. The voice over for the roach will be that of a New York Wiseguy, so it needs to have that look and feel. Contact me with questions and so we can discuss price. Final format can either be for Animation Master, Carrara 8.5 Pro …
Last reply by detbear, -
- 1 reply
- 2.1k views
Mike Cossey here.. Now onto the Job...yes it will pay if I can get it done within budget. Budget?will try to do it through bidding If no bids are within budget, I will scrap the idea... What I will do is give here specific as possible guidelines and then you send me an email with a bid........if it is within budget, I will award you the Job..... If all bids are beyond budget, I'll have to scrap the idea. I will pay Half upfront, and the rest upon completion.... You MUST have a paypal account in order to get paid. I will not ask for any work to be submitted without you being paid. You can use any "free to use" (for any purpose) models etc …
Last reply by Kamikaze, -
- 0 replies
- 445 views
Putting together a Proof Of Comcept video for work and I need a seasoned modeler to create an adult male in a police uniform. Model would need to be textured, but not rigged. Looking for something similar in style to "http://www.the-ottoman.com/blog/". Character concept art available. Contact JARosewood AT gmail.com with portfolio
Last reply by Rampage0007, -
- 11 replies
- 626 views
Hey folks, 1stly- this most likely will not happen, but I am testing the waters here. I have a guy who needs some architectural animation made for him of 2 modern house designs. He supplies blueprints of the houses- that's all. We would do the rest. Blueprints attached. He has seen and likes THIS style of animation: http://vimeo.com/65184155 I would like to build a team of 2-3 seasoned A:M ers to help me model, assemble, light, design and render some 25 interior and 5 exterior :10 second 'zoom/pans' of the entire house(s). The 2 homes would need to be populated with trees/bushes/plants, appliances, modern furniture, cars, glassware, TVs, beds with bedsp…
Last reply by AZ3, -
- 3 followers
- 4 replies
- 577 views
requirements: a: Modeller, I have a large portion of the work done already. Looking for a seasoned modeler to handle the more complicated modeling of the spring loaded locking mechanism. Will provide drawings b:. mechanical c: Approximate time frames (how soon do you need the help, how long might it last) ASAP a week, depends on how fast you are. Email me jason AT GlossyCUBE dot com Pay a 5 year supply of the product and 2 3D printed Cube Wall mounts. The part you will be working on is a cube shaped wall mount. Relatively simple. This part will be 3D printed for customers. The Actual product inside the wall mounted cube will be a tube o…
Last reply by jason1025, -
- 1 follower
- 9 replies
- 650 views
I have my Cleopatra model ready for textures. Only I suck at clothing textures. I have a reference of how I want her to look but my skills with photoshop are passive at best. If someone could help me out I would really appreciate it. Unfortunatly this isn't a paying gig and the best I can do is put your name in the credits. If your interested in helping drop me a line here and I'll send you the model file with the reference pics. Thanks
Last reply by zandoriastudios, -
- 1 follower
- 9 replies
- 547 views
1. requirements Please provide some pictures or a demo reel It is key that you can bevel this 2 piece solid object must work in metric units must be able to communicate with me via skype must accept payment via paypal or check must have free time to focus on this short project a: Modeller b: mechanical c: this is a 1 or 2 day project, I can handle minor tweaks once the frame has been created. Position starts effective immediately d: you can email me if you are interested Jason (at) lightdims dot com. Description of model you will be creating 2 small boxes. with beveled compartments in them.
Last reply by thejobe, -
- 3 replies
- 332 views
Hey Everyone. I'm working on a detailed human. Currently too detailed I'm afraid. Anyone out there interested and talented enough to match a face body with high precision? Retopo tool may come in handy. Thanks William D
Last reply by detbear, -
- 1 follower
- 17 replies
- 769 views
The key to getting any short done is knowing ones strengths and weaknesses. I've discovered mine is modeling heads. For some reason I have a mental block on this particular project. I'm trying to create a bear character based on Disney's Humphrey the Bear. Can't offer anything more than credit where its do at this point, but since I'll be use the character as a mascot for Pappa Bear Studios, it may turn into somthing. Just need the head right now, since that is my sticking point. I interested send an email to me pharris430 at nycap.rr.com.
Last reply by serg2, -
- 5 replies
- 409 views
This is a paid position for a developer needed to code basic web based utilities The position could expand to part time, full time or seasonal work after July 2012 timeframe. Minimum pay: (the value of $79 subscription to A:M) You will be subscribed to A:M for the duration of this project. The subscription may be renewed based on your work for another year with no additional obligation from you. Maximum pay: Although the primary goal is to develop free tools for the community, the products you create could generate revenue both inside and outside the A:M Community. Details of any marketing and distribution will be worked out on a case by case basic with …
Last reply by fae_alba, -
- 2 replies
- 302 views
I am looking someone to create several realistic diablo style human models for an RPG game. This is a contract job and modeler will be paid per model created. Send links to your portfolio if you are interested. williamhennes@charter.net
Last reply by william hennes, -
- 2 followers
- 13 replies
- 491 views
If Anyone knows about smart phones this one was state of the art Last year. It still works perfectly but has a cracked screen. The cracks do not seem to effect use but cracks don't look that pretty. Comes with the 8GB micro card, battery, headphones and case. What I need. A model of an LCD HDTV, blu-ray player and Surround sound receiver and glass stand. something very much like this I am very picky about models. All the normal's need to be facing the correct direction. No razer sharp edges. Why because unless its a razer they don't normaly happen in real life. So spend the extra time and bevel. No peaking. Even what app…
Last reply by jason1025, -
- 0 replies
- 405 views
Issue resolved but cant delete topic for some reason
Last reply by Sean delgatto, -
- 1 follower
- 1 reply
- 367 views
I'm engaged in a commercial project that may require extra hands on board soon. So I'm really gauging interest for now. It's a "structural engineering project" so it'll be mainly mechanical modelling/rigging/animation for use in Flash. Therefore a knowledge of that program would be beneficial as some coding (AS2) work may crop up. Should we need anyone at all, it won't be for another month or two and it should last for about six months. Perhaps a year if all goes well. If you're interested please email me: kenhes (at) gmail dot com Thanks.
Last reply by KenH, -
- 1 reply
- 381 views
I'm working on a music video and I need two characters modeled and rigged from my provided roto sketches. You can view the animatic on Vimeo at http://www.vimeo.com/20167713. There's a recurring scene that first appears at about 1:50, people walk slowly across a bridge. they all have heart-shaped holes in their chests. They are only seen from the back. The camera will do a reverse zoom, backing through the holes in their chests as they walk slowly into the gloom. The models do not need modeled faces, face rigs or hand rigs, as they are only seen from the back. However I do need maybe one variation on each, maybe different hair style or different sleeve leng…
Last reply by Gerry, -
- 1 follower
- 8 replies
- 644 views
Hi, I am looking for someone who can model an astronaut for me. I'm thinking something along the lines of a U.S. Astronaut something like that attached. It wouldn't need to be terribly detailed, but some details. :-) Is that vague enough? I'll know what I want when I see it. Ha! I'll probably want additional modeling work from you, assuming you do a good job with the first one, when you're done with the Astronaut. I'm not rich, just a one-person animator who has zero modelling skills. If this sounds like something you would be interested in doing and you don't charge an arm and a leg, please contact me as soon as possible. Thank…
Last reply by John Bigboote, -
- 3 replies
- 533 views
Hello, I am working on a project for a local PBS affiliate and for the national park service. I have several animations that need to be done, and I can not do them all myself. The budget is low, but it is a paid gig. Each animation has a set price to it. I will provide an animatic for you to follow and the quality is that of a Nova program. Deadlines are tight, but doable. If you are interested, please email me with a link to samples of you work to williamhennes(at)charter.net Best, William
Last reply by william hennes, -
- 1 follower
- 20 replies
- 814 views
Looking for quotes on a 5 minute animated short, based on Dragonstorm from Unstoppable Comics. The Premise is simple, Dragonstorm enters a warehouse, house fights a bunch of ninjas (also from Unstoppable Comics), comes upon another villain, and ends with a to be continued. I understand that there is a lot more involved in putting this together than I can think of right now, and in no way am I trying to offend anyone with the lack of detail in what I am looking for. I own a copy of AM and just don't have the time to dedicate to learn the program with everything else going on. No sound is needed, I already have the stoftware for that. Winning bid will be based on a c…
Last reply by higginsdj, -
- 4 replies
- 438 views
I'll say right up front I'm not sure I can afford this. So if you are concerned about wasting your time; don't waste it on me. I make a webcomic called Remedy. Awhile back I was trying to make an animated short for the comic. I have all the voice acting done. I had pretty good quality rotoscopes made by artists for all the characters. But my skill in modeling is lacking and I became both frustrated with the steep learning curve and the slow progress of my abilities and I became incredibly busy with getting the business end of the webcomics site off the ground. So now I'm looking to outsource. I have very limited funds. As I said I don't know if I c…
Last reply by Rob_T, -
- 4 replies
- 407 views
Hi there, I am looking for someone who can completely and professionally rig a model I made. I need bones with a clever IK. Of course I will pay for the service. John
Last reply by ruscular, -
- 11 replies
- 533 views
I had an offer early last week to build this model, but unfortunately things did not work out. I am looking for someone who could model the Spitfire: It would be preferred if the modeling could be completed in the next 2-3 weeks. Some requirements about the model is that a .obj export will be required as it will be utilized in both AM and 3DS Max. This essentially means that a denser mesh is needed, all normals facing out and the model be exported in parts as each part will have to be reassembled in 3DS Max. If you are uncertain as to how to do the export, then I can do it, just it will be needed that the whole model be built with a denser mesh,…
Last reply by Tralfaz, -
- 1 follower
- 14 replies
- 622 views
So, I may have a project and need to give a quote by the days end. I know this may seem rude and crazy, but I swear it's a real deal. I can't model this camera (kinda new at 3D I'm an After Effects guy) so I'm looking for one of you... a brilliant A:M GOD! Just need it modeled. I should be getting better pix very soon. If you're interested let me know. Shawn
Last reply by new guy, -
- 1 follower
- 9 replies
- 495 views
Hi all, Non paying...... I am taking 7 mths off work next year to do an animated short. What I need are Mentors/Critics to view my progress. People who aren't afraid to give me their full and frank opinions. Note that I am NOT after people who will just say "I like it" or "I don't like it" etc. I need those who are willing to spend the time to say why. At present I haven't decided on the platform (AM or Blender). Both have their good and bad points and my pre production is currently building the main characters (2) on both platforms. I will definitely be using Blender for some things (ie the NLE and Render nodes for post work), but if I do switch to Blender…
Last reply by nimblepix, -
- 2 replies
- 421 views
I am looking for someone who can model a very good to excellent representation of Dave Bowman from the movie 2001 - A Space Odyssey (see picture below). All I require is the neck and head of Bowman. The model should be fully textured (no SSS as I am using version 14.c of A:M). The eyes should be able to move, eyelids blink and the mouth open and close. The head should be modelled full size (1:1 scale) Once completed, I would like to be able to use the model whenever and wherever I see fit. I also want to be able to donate a completed Bowman figure model to the A:M Resources (Contributor's Cue), to go along with my other 2001 models. Credit will be given to …
Last reply by Tralfaz, -
- 0 replies
- 281 views
This isn't really a "professional" job in any unspoken terms, but this is the "Help Wanted" section and probably the best place for it. As the other post above, this is a straight forward rigging and smart skinning, one model gig. Currently I've been using 2001 and wanted to try the squecth, but one step forward, two steps back. I'm out of patience and running out of lifespan, a hairline and my subscription... The model it's self, is rather incomplete... but that dosen't concern me yet (It's the body sculting I need) and she is also rather quite naked (but I don't know if that qualifies as the "x-rated" rule stated above). She's going to be a sword fighter, in a…
Last reply by dailan1, -
- 0 replies
- 324 views
As you may know I'm developing my "Nightcrawlers" project in A:M. I'm looking for someone to rig Skarab, who you can see in the Feature/Special Topics forum. It's a straightforward rigging job. The project will grow later, but for now I'm looking to have this one character rigged and at the same time get a sense of the cost. Things to keep in mind are the non-standard anatomy requiring special attention to the shoulders and hips, as well as a fully rigged face with non-standard eyes and eyebrows. The model is about 90% done. The only remaining work is modeling teeth, finishing up his "utility belt", finishing the decaling, and organizing groups in prep for the riggin…
Last reply by Gerry, -
- 8 replies
- 520 views
Hi Guys. My employer has asked me to look around for an animator and since I use AM, I thought I'd try here. He's also interested in getting people living in a different time zone to Ireland as then we can have people working "over night". However, all interest is welcome. The animations are then brought into Flash and converted to swf. So the animation isn't restricted to AM either. I've attached a recent example. It's a young company and we do mainly educational animations that illustrate client products or educate a student in for example maths. The company has a patented interface system and is attracting many companies. All we need now is more people to create…
Last reply by KenH, -
- 0 replies
- 308 views
Im looking for people who are really good at modeling, even if you have a pre-existing model that can move well, doesnt crease at every joint when ever it moves. Need a Female model and a Male model. Will get into specifics about the job as we talk further, Im recording the voices in June however I can still meet up and discuss things further any time but need some of the models by July-August 2009 Website: http://www.novicestarproduction.com/INproduction.html Contact email : sean_delgatto2001@yahoo.com Could really use help in this department as with segmented figures such as robots and bugs I'm just fine. But with humans since its one big b…
Last reply by Sean delgatto, -
- 2 replies
- 434 views
My 3D characters are finally created. Thanks to Bruce from http://www.pencilwedgees.com/ for creating my 2D characters into 3D!!! He was professional and extremely helpful. I highly recommend him if you need an animation project done. You can check out all my characters at http://www.bogthedog.com Thanks J
Last reply by Rodney, -
- 0 replies
- 376 views
Hello The company I am working for is looking for an animator to create 4 girls that will dance on an image stage. I'm looking for any body who has mastered animation master. Shoot me an email at jd@mb-concepts.com
Last reply by jddesigner, -
- 1 follower
- 3 replies
- 512 views
We're going to try and sell single solutions: like "Make Anime" at an anime con, or "Make Superheros" at a comic con, or "Make Titles" at a DV con. First up, "Make Anime," (let's see if this even works?): Requirements: 1) Written for 7th graders (are you smarter than a 5th grader?) 2) Includes everything to a finished product - INCLUDING A:M NLE & sound! (Post on A:M Films) Here's what I suggest: Gather up all the anime or anime-like free models we've got, (see the "A:M Extras" DVD - if you don't have it, buy it from our store.) Find the existing "How to Model Anime" tutorials (there are several). Use as much drag-n-drop as possible (7th graders!).…
Last reply by heyvern, -
- 2 replies
- 317 views
Hello, I was hoping someone would like to do some rigging. I've tried many times myself but have failed. Description: I will need 2 human characters fully rigged with the squetch rig and fully weighted if needed.(without facial poses). Time Frame: ASAP really, but once you tell me that you want to do it and i send you the model file you can have up to 2 weeks to complete the first model then once you finish that I'll send you the other model file and you will have another 2 weeks to complete that one. I really am in desperate need of a rigger so please email me if you're interested. Adamb47@gmail.com If the moderators would like to move…
Last reply by adam&oliver, -
- 3 replies
- 446 views
Hey A:Mers, I need a good texture artist to set up UV maps and texture maps for a line up of about 5 Hash characters. If you're interested, send me a reply and link to your work in Animation master. The characters are human. Thanks, William
Last reply by detbear, -
- 1 reply
- 321 views
Please see attached spec for assets needed for "virtual room" for students. I am looking for 10 characters with 10 short animation sequences (swf) each. Also needed are theme backdrops and static assets for the rooms that the students can use their points to purchase. Please go to www.uboost.com and navigate to Room to see current functionality. If you are interested in working on this project please read attached draft spec and email me for more info at jbower@uboost.com. We would need work done in 30-60 days. I have copied spec below because uploader was failing. Thanks, uBoost Virtual Room Digital Asset Specification Table of Contents …
Last reply by ruscular, -
- 14 replies
- 778 views
I need to create my 2D cartoon characters into 3D characters with ALL functions (Ex. muscle, skeleton, facial etc.)from the Hash software. I will import them into my computer and animate them myself. Seeking REASONABLE FEE QUOTES, time frame, and serious responses. Any questions, let me know. Thanks, Francisco
Last reply by majestic72, -
- 1 follower
- 13 replies
- 733 views
Hi, I try to figure out how much should I charge for a 90 sec animation ? details: - upper half character animation ( tv speaker character doing presentation) no walking or full body movement - basic lipsynch and facial expression... - character rigged with squetche already done - dialogue audio files include - rendering 640X480 ( with 16:9) simple rendering setting , no extra effect or multipass - computer power : one guys with one machine any estimation in time or in money will be helpful Thanks in advance Al
Last reply by Gerry, -
- 1 follower
- 1 reply
- 409 views
Hello everyone! We - the E-Studioz team - is currently searching for an animator for our small hobby project with the (project)name 'Poge a Chimp', which has been in development for few months. Poge a Chimp is an action/skill multiplayer game with the premise to bounce other players off of hovering platforms. The setting is a lab of a nutty professor who's testing his invention with unkind experiments. The result are gene-altered chimps with a high aggression potential who have been shrinked by his newest invention - the minimizer 2000 - to a fraction of their original size and have to compete in his self-built arena in the center of his lab. By means …
Last reply by 3DArtZ, -
- 0 replies
- 276 views
I was recently contacted by a company (I can't disclose much here) that is interested in moving their product from a Alpha/Beta product to a Production product. It is a product that has many similarities to functions that AM uses (textures, 3D objects, positioning, blending). I, unfortunately, do not have the time to work on this project. It is a paying project (paying quite well for the correct individual). It will require knowledge of C/C++, object oriented design, 3D objects, textures, graphical user interfaces, etc. It does not compete with AM, just requires some of the same knowledge that a developer may have if they have worked with AM. You also get to work fr…
Last reply by walasek, -
- 1 follower
- 1 reply
- 317 views
Hi, Try as I might, I totally suck at trying to model a face from a photograph. Is there anyone out there who is good at face modelling who would be interested in taking on a commission to model a face for me? I have very good photographs of front, back, left, right and top of the head/face I need modelled. This is for a church project and I'm paying for it out of my own pocket so I don't have a TON of money to spend, but I would be willing to spend a reasonable amount to pay someone, and if you have experience (and can show me samples) of your work of doing really nice work, I could probably find it in my heart to dig a little deeper to pay more for real…
Last reply by TurboGorilla, -
- 0 replies
- 249 views
Hiya, Is there anybody on-line who: * Lives in Toronto? * Has AM15? * Has either a *really* fast computer or a render farm setup? I'm helping a friend out with graphics for an independent film short. My computer is very reasonable, but rendering time is still time. If some kind soul has some rendering horsepower to spare, I'd like to talk to you. You will be paid in the standard currency of independent films... Screen credit and gratitude! Thanks very much! Please respond to josham@cjmunday.com, subject "RENDERING".
Last reply by oofoe, -
- 0 replies
- 385 views
Hi Folks, We're in R&D on a project and need a bid for one model with rigging in order to create a presentation. Thanks for contacting us at: bob 3 at bobanderson dot biz --Bob Anderson
Last reply by BobTN77, -
- 3 replies
- 519 views
Hi Everyone, I need to make a 30 second TV Commerical with the following items supplied: 1. Established Rigged Model, Props, and a Wav File - Need to animate the character, lipsynch, add props, and a simple background. The idea is that the Model would walk to the foreground and then speak, with the props in the background and on the sides. The Wav file is 32 seconds long. While the model is speaking, I would like to have the shot from the waist level up, with the face, arms and body animated. I would like to cut to a couple of diferent camera angles to make the speech more interesting A picture of the model is attached. Here is it's decription as posted on …
Last reply by Jentham2000, -
- 0 replies
- 337 views
Hello all, I have a project and I need a model built and rigged, pose sliders for lip sync and facial expression. The model is rather simple but the poses will need the attention. Facial expression, lip sync, etc... I need to hear from all interested parties. I made a post here some time ago with miserable results. People who began the work then flaked out. DON'T WASTE MY TIME! If you are good and reliable, I want to hear from you. Thanks to all! Tom Rennen Intelligent Light LLC tom@tomrennen.com www.tomrennen.com
Last reply by Tom Rennen,